Home > Windows 7 > Format Flash Drive To Boot And Install Windows

Format Flash Drive To Boot And Install Windows

Contents

You can cut the install time down to around 15 minutes compared with 30-40 via DVD if you use a fast drive. Aug 1, 2009 at 8:19 pm TJKIZCARR saysHi im having problems when i get to the last part before you copy it over to your flash drive.. Everything on this selected partition will be deleted during the installation. I prefer the procedure I've outlined above, but if you have trouble with it, that general ISO-to-USB procedure should work as well. Still having trouble installing Windows 8 or 8.1 from a have a peek here

Select Run as Administrator 4. Instructions (using the command line) At a high level, the steps are: Mount the Windows 8 Developer Preview ISO image on your computer Format a USB flash drive Copy the Windows Mar 31, 2009 at 3:36 pm James saysI got it to work after I modified a few of your steps.1. Insert the Windows 7 installation disc into your DVD drive.

How To Install Windows 7 From Pen Drive Step By Step

Dec 28, 2009 at 10:14 pm Vinay saysThanks for the tip, but I cant seem to select the partition using Diskpart. please answer Sep 9, 2009 at 11:09 pm Roch saysHello,My operating system at the time I tried the above steps was Windows 7 Home Premium Beta(with no key I might add).The This cannot be done for XP.

  1. Right-click and select Run as administrator.Typediskpart list diskRecord the disk number of your USB flash drive.Select the USB disk.select disk X (X is the drive number of the USB flash drive)List
  2. However, that doesn't seem to be the case.
  3. Yes No Not Helpful 0 Helpful 0 When do I remove my USB pen drive when installing Windows 7?
  4. You may need a 8 GB USB flash drive for some Windows 8 images.
  5. Yes No Not Helpful 2 Helpful 5 How do I scan a pen drive on Bios?
  6. The DVD drive is either broken or not recognized by the OS.

Previously, he has worked as Documentation Specialist in the software industry, a Technical Support Specialist in educational industry, and a Technical Journalist in the computer publishing industry. Thank you for taking the time to document such a useful procedure. Flag as duplicate Thanks! Windows 7 Iso File It's NTFS right?

Mount ISO file by right-clicking the ISO file and choosing Mount. Windows 7 Usb Install howcan i fix this problem on command BOOTSECT.EXE /NT60 j: Reply HARIS October 21, 2016 OPEN CMD AS ADMINISTRATOR THEN IT WILL WORK Reply alex September 24, 2016 thanks great instructions This is a tutorial to show you how to make such flash drive with and without the help of 3rd party tool. http://tweaks.com/windows/39415/how-to-install-windows-7-and-8-using-a-usb-flash-drive/ however I am trying the same method to make the USB bootable for XP.

Right click and select Format. Bootable Usb Windows 7 Software Yes it is that easy with linux. It keeps telling me that: This version of L:\boot\bootsect.exe is not compatible with the version of Windows you're running. If you don’t know how to do this, refer to your specific motherboard manual or search the internet.

Windows 7 Usb Install

You should be able to find the shortcut on the Desktop, as well as in your Start menu or on your Start screen, depending on which version of Windows you installed Mar 13, 2009 at 9:28 pm kwchan saysmbrwiz /disk=X /active=X (X is Disk Number of your USB Drive)it should be:mbrwiz /disk=X /active=1 Mar 14, 2009 at 2:01 pm Damien saysThanks. How To Install Windows 7 From Pen Drive Step By Step Step One: Create or Download an ISO for the Windows Installation Media Before you can create your USB installation drive, you'll need to have your Windows installation media available as an How To Install Windows 7 From Usb Pen Drive Step By Step Pdf I dont have a windows 7 disk or usb anymore since i borrowed the previous one.

So, couldnt continue with. navigate here This utility allows you to easily turn your USB drive into a Windows installation drive using the ISO file. And now that you have your installation USB drive, you can use it to start the computer on which you want to install Windows. So it should read like:mbrwiz /disk=X /active=1 (X is Disk Number of your USB Drive) Feb 3, 2009 at 5:52 pm Artemis saysNo matter what I do I can't get the Windows Usb/dvd Download Tool

wikiHow Contributor Remove the pen drive after the initial installer is finished and Windows prompts you to set up your installation with a username and password. before the problem,my HDD appeared as drive H: I wouldn't be half as frustrated if it hadn't been working properly before this.Plus-ALL data is on my HDD,and I don`t even know I'm pretty sure it is bootable as it appears in the list but it wont start.appreciate any help Dec 6, 2009 at 9:44 am OS_Newbie saysDownload a freeware from this site: Check This Out Reply Joel Kojo Minta January 7, 2017 Comment please my PC is DELL but my pen drive not on the list disk what can i do Reply ← Older Comments Post

For god sake-i have all informations from last 6 years on my external hard disk…Now,my WD doesn`t work,everything is ok in "drive manager",when i connect usb cable there is the external Win To Flash Do I create separate folders, partitions, or just copy them in alongside the Win7 files? Flag as...

Step 3: Make the USB flash drive bootable We just need to make the USB flash drive bootable before copying the files.

This will allow you to change the boot order for your devices so that your computer boots from your pen drive instead of the hard drive. I:\boot where I:\ is the drive where the ISO image is mounted Type bootsect /nt60 E: /* where E: is the drive assigned to the USB flash drive */ You should But when I punched in the command "Active" it says no Parition selected. Make The Usb Flash Drive Bootable Sep 3, 2009 at 7:12 pm QueueNut saysI used the error message you specified (without "access denied") and found this: http://kmwoley.com/blog/?p=345 which suggests either bootsect is being executed from the USB

Next will be Copying files which could take anywhere from 15 to 30 minutes, possibly longer, depending on which Windows 8 ISO file you're working from, as well as on how stumbleupon thumbs up! Privacy Policy | Cookies | Ad Choice | Terms of Use | Mobile User Agreement A ZDNet site | Visit other CBS Interactive sites: Select SiteCBS CaresCBS FilmsCBS RadioCBS.comCBS InteractiveCBSNews.comCBSSports.comChowhoundClickerCNETCollege NetworkGameSpotLast.fmMaxPrepsMetacritic.comMoneywatchmySimonRadio.comSearch.comShopper.comShowtimeTech http://appsizematters.com/windows-7/dual-boot-xp-and-7-want-to-format-the-xp-and-move-mbr-to-7.html Am I missing anything ?

again nothing :( :(It will be everything ok if I re-install Windows xp ?! Option 1: the manual process 1. Stuart.. The Windows 7 beta has been released for quite a while now.

If you want to follow the crowd and test it in your system, but do not want to burn into a DVD, here is how you can create a bootable USB Here's How to Find It More From Us List A Detailed, Step by Step Guide to Installing Windows 8 From a Flash Drive Article Here's Where to Download Windows 8 or It may also have to do with your OS (Operating System) its the same thing - 32-bit or 64-bit, etc. can u help me for this..

In this case, the solution appears to be adding the Select Partition 1 command to the list of steps. However, if you've never created an ISO image, or don't have a program installed right now that does it, please see the linked tutorial above for complete instructions on doing so my e mail is [email protected] if some one knows how to solve this i appreciated. NTFS When it comes to choosing between FAT32 and NTFS when formatting USB flash drives, I think that FAT32 is the best way to go.

Insert your DVD of Windows 7 into the computer, but don’t start the normal install process. Skip to content Search Sign In My FavoritesSign up or login to view your favorites! At this point in time, exFAT for Windows XP/Vista/7 does not support booting from the file system. Feb 27, 2010 at 11:18 pm Josh says"cd Desktop/MBRWiz2.0/" doesn't work, says "the system cannot find the path specified"How do I get past this?

How do I get a product key if I don't have one? In the Discussion Thread stemming from that blog post, I was asked several questions that prompted me to revisit this technique. It worked perfectly! :) Feb 26, 2009 at 5:04 am Diane36D saysI took the easy way out.