Home > Windows 7 > Cant Boot To My Windows Xp HD After Installing Windows 7.

Cant Boot To My Windows Xp HD After Installing Windows 7.


If you use this sequence, the Windows Boot Manager will show both Windows XP and Windows 7. Many thanks in advance Louis February 13, 2010 anton I have a same problem as Louis. I suggest you try other forums or consider giving up. While booting your computer, press the key that takes you to the BIOS. Source

Then, I used EasyBCD, and wham, My Win 7 is back. Boot from the XP installation disk and start the install process. by R. In addition, System Restore is configured by default to create restore points every 24 hours.

How To Dual Boot Windows Xp And Windows 7 (xp Installed First)

But it sounds like XP was already on your system (and Ubuntu?) And you installed W7 after that?I did have Ubuntu installed before Windows 7 (same partition) but Ubuntu has a Single Hard Disk: In case all the operating systems are on different partitions of a single hard disk, you can use the Disk Manager to fix the problem. Then, select the Disable The Automatic Restart On System Failure item and press [Enter]. A window pops up showing the drive is being queried for available space.

  • so had to format the disk0 and install xp again.
  • If EasyBCD also fails, chances are that there is some hardware fault that we will discuss in the next section.
  • So the main thing - all boot related files must be on active partition (for XP and for 7) Windows boot loader cannot boot a system on another physical disk AFAIK
  • About Bright Hub Contact Us Advertise With Us RSS Site Map Terms of Use Privacy Policy Copyright Policy ©2012-2016 Bright Hub Inc.
  • For example, malware or a buggy driver may be loading at boot and causing the crash, or your computer's hardware may be malfunctioning.

Like let's say I want to test an antivirus without an effect I have been experiencing in the past (windows update not working and resulting in myself having to re-install the My dualboot also works correctly! If the information about the Windows XP installation is missing in the Windows Boot Manager, Windows XP won't load. Windows Xp Startup Repair Apparrently you need XP on first then put Win7 on.

What does this Https - "not fully secure" warning mean? Dual Boot Windows 7 And Xp Separate Hard Drives Will I still be able to access XP?Any other suggestions? Continuing with this process if using Win 7 Home Premium 64 bit could have serious implications as changes made are semi-permanent, which require special software to reverse. view publisher site Flag Permalink This was helpful (0) Collapse - About the mistake.

If any body want to install other OS like like Linux, Just make a 5GB free space then install this largest free space. Easybcd Download I might try your method first... What can I do now? The method you use to restore the system will depend on what backup utility you used, so you'll need to follow the utility's instructions on how to perform a restore operation.

Dual Boot Windows 7 And Xp Separate Hard Drives

Good luck. so any comments on where did i go wrong, becow i want to still install win7 and have dual boot with xp March 2, 2010 martin dear sir i have windows How To Dual Boot Windows Xp And Windows 7 (xp Installed First) Add a new partition located after the Windows Vista/7 partition you just shrunk. How To Install Windows Xp Over Windows 7 Once you have Windows XP on your boot partition, you need to create a fresh partition or add a secondary hard disk to the computer for installing Windows 7.

The only thing I know is that Windows 7 (and or Vista) need to be the second OS you install. http://appsizematters.com/windows-7/after-installing-windows-7-x64-sp1-problem.html That F partition was not there when I started Windows XP installation. While the Windows Disk Management tool requires the ‘Virtual Disk' Service to run if you want to view basic volume information, if you want to use the tool to resize your In that case, you'll need to disable the option for automatically restarting on system failure. How To Install Windows 7 And Xp On The Same Computer

I'm a newbie with that, so sorry for any futures gaffes. To use the Fixboot tool, from the Recovery Console command prompt, type Fixboot [drive]: Where [drive] is the letter of the drive to which you want to write a new partition The interface of EasyBCD, is simple and even a newbie can use it easily. have a peek here Flag Permalink This was helpful (0) Back to Windows 7 forum 27 total posts Popular Forums icon Computer Help 51,912 discussions icon Computer Newbies 10,498 discussions icon Laptops 20,411 discussions icon

Unfortunately, you are wasting your time here. Easy Bcd You are great. If anyone can advise this would be great.

bcdedit /set {ID} device partition=\Device\HarddiskVolume1\Device\HarddiskVolume1 refers to the first partition.

But when I try that menu entry, all the computer does is reboot. If it's a software problem, you may be able to fix it by performing a Startup Repair operation. When you see the message Please select the operating system to start or hear the single beep, press [F8] to display the Windows Advanced Options menu. Easybcd Free I have a new computer with Win 7, followed all the instructions but after reboot the screen only shows Windows 7 and Ramdisk Options.

eBay vs. It will reboot several times - do not interrupt it. Just saved my arse. Check This Out December 21, 2010 Bryan1998 A problem has been detected and windows has been shut down to prevent damage to your computer.

When booting into Win7? But as to boot options, XP stays invisible. December 24, 2010 RonB I tried to dual boot XP on a p6610f PC. The EasyBCD tool doesn't work in XP, and following this process, only XP will boot right now.

windows-7 windows-xp hard-drive boot share|improve this question edited Mar 30 '14 at 20:01 asked Mar 30 '14 at 19:07 sammyg 8,83245118179 When you installed Windows XP, the original MBR I have already tried the Dual-boot Repair tool and the Visual BCD Editor without any success. If you read all these threads, you will see that these replies have been going on for months and many have no good results. I had to reset manually then it would not boot to windows 7 after removing the xp op disk.

what will happen if I format the drive C:? *****previously, I use the command "bcdedit" remove the win7, so there was no boot management for dual os. So i put my disc in and booted from it, but when i got into it, it goes straight into setup and tries to install a clean copy of Windows 7. September 29, 2010 Brad I have successfully installed a Win7 64bit with XP 32bit using most of the detail and the EasyBCD. If you're still experiencing crashes, your computer likely has a hardware problem.

It asks for the drive, and the drive with xp on it is now, under windows 7, drive D (it is E when I boot xp). It loads all of the generic drivers and then when it goes to the windows installation screen the BSoD comes up. Plz sort out. edit this post

Would be greatly appreciated. Windows XP Wont Boot After Windows 7 Install: Troubleshooting Windows Dual Boot Problem Where is Windows XP? I wish my old computer didn't Kark it, and I wish I hadn't bought this new pc and I AM NOT buying a new scanner etc because NOTHING is compatible with