Home > Hard Drive > Won't Boot If 2nd Hard Drive Installed

Won't Boot If 2nd Hard Drive Installed


permalinkembedsaveparentgive gold[–]Spawn3323[S] 0 points1 point2 points 1 year ago(1 child)Yeah it wouldn't let me reinstall as it already had partitions so I have deleted it and reinstalling now. What are you thinking? Musicarta 447.918 görüntüleme 3:58 BOOTMGR is missing fix - Süre: 9:17. I'm not an expert and maybe someone else can be more helpful, but could it be that the HDD did not format correctly when you reformatted, hence it's not being detected http://appsizematters.com/hard-drive/installed-windows-7-and-i-lost-about-350gb-hard-disk-space.html

Unplug both cables to the new drive and boot. Reklam Otomatik oynat Otomatik oynatma etkinleştirildiğinde, önerilen bir video otomatik olarak oynatılır. Then, if the problem still occurs, you could try resetting the CMOS battery and check if you need to update your BIOS. We know nothing about your hardware.

Installed New Hard Drive Windows Won't Boot

That is, the boot drive should be on SATA port 0 (or lowest number) and the others on higher numbers. I bought a 2TB drive and installed it. PC wont boot when I connect second hard disk After installing Second Hand GPU PC wont boot Pc doesn't always boot with second hard drive plugged in PC doesnt boot after That is the case in this case also.

Get the answer RetiredChiefApr 29, 2013, 6:29 PM First off: The CPU and the GPU are the two biggest power components. artart00Apr 30, 2013, 12:26 AM Hello again and thank you for your swift replies!sofaMonster: Indeed SATA drives don't need the master/slave distinction and I made sure to set the correct order I have been having similar problems with my Acer computer. Windows Won't Boot Without Second Hard Drive When you install a second hard drive in a PC, it shouldn't get in the way of the original drive’s boot process.

I use my 2TB for movies etc. Computer Won't Power On With Hard Drive Plugged In Either cables, either the SSD itself, which is most likely. When it got to the desktop, the mouse was very jerky and everything was very slow but the 1 tb drive was shown properly again. http://www.pcworld.com/article/2360427/what-to-do-when-a-second-hard-drive-bricks-your-pc.html Oturum aç 4 Yükleniyor...

price_thFeb 16, 2012, 1:59 AM Newly added drives sometimes changes the boot device order in the BIOS. Pc Won't Boot From Hard Drive I'll hopefully be able to check tonight permalinkembedsaveparentgive gold[–]Spawn3323[S] 0 points1 point2 points 1 year ago(0 children)Cheers! My System Specs Computer type PC/Desktop System Manufacturer/Model Number Ignatz Special; 4 speed manual gearbox; factory air conditioning; one of one OS Windows 7 Home Premium SP1, 64-bit CPU Intel Skylake I truly thank you for all the help, and will get back to you shortly.

  1. Track this discussion and email me when there are updates If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and
  2. Worked like new.
  3. I have attempted repair on the HDD following the on screen instructions but it is still not working.
  4. The drive where windows is installed should be the primary drive and that in the boot order, be sure to place this drive on top.
  5. Well worth the investment.
  6. FREE Tech Support 381.445 görüntüleme 3:30 How to fix a computer that won't boot into Windows - Süre: 31:13.
  7. UrLastBr3thFeb 16, 2012, 3:35 AM @Realbeast, which one exactly is the the GSATA controller.My motherboard, GA-880GA-UD3H, has 6 Blue sata ports, and 2 white sata ports.=Edit=The white ports are GSATA, let
  8. Hakkında Basın Telif hakkı İçerik Oluşturucular Reklam Verme Geliştiriciler +YouTube Şartlar Gizlilik Politika ve Güvenlik Geri bildirim gönder Yeni özellikleri deneyin Yükleniyor... Çalışıyor...
  9. Let's see the most common fix for this.

Computer Won't Power On With Hard Drive Plugged In

Conducted windows updates and downloaded all 68 but they "failed to install" so I have clicked to restart computer and it's now saying "installing updates". Of course, there’s often a big gap between what should happen and what does happen.Let’s see if we can fix this problem.[Have a tech question? Installed New Hard Drive Windows Won't Boot Anyway, next after formatting unplug them both and then leave the HDD not plugged in at all! Installed A New Hard Drive Now Computer Won't Turn On You are trying the boot SSD without the HDD connected, right?

Same problems as above. http://appsizematters.com/hard-drive/shall-i-throw-away-this-hard-drive.html My device was not showing up at all when I selected the settings but when I saved them and rebooted it worked! Flag Permalink This was helpful (0) Collapse - You're welcome. UrLastBr3thFeb 16, 2012, 4:20 AM I have the 2nd hard drive in GSATA, and the main hard drive, regular sata, but it still won't boot. Installed New Hard Drive And It Wont Boot

but will boot from other drives? I have a similar issue in that my PSU is fine with 3 HDDs on one SATA power cable, but won't boot if I use the 4th connector. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. his comment is here Why is that?

A CCM membership gives you access to additional options. Hard Drive Detected In Bios But Won't Boot Although SATA capable boards DO have channel designation, there is no need to put then in any specific order, I too am having the same problem, but my computer will load mickygsOct 7, 2015, 7:16 AM artart00 said: Hello again and thank you for your swift replies!sofaMonster: Indeed SATA drives don't need the master/slave distinction and I made sure to set the

Johnny Phung 476.615 görüntüleme 3:28 Hard Drive Will Not Boot - Süre: 4:00.

As RetiredChief said and as I saw with the power calculator tool, each HDD uses no more than 10W...2) I'm familiar with electronics and I understand that waiting 10 seconds to Ask ! permalinkembedsaveparentgive gold[–]DanielCade 0 points1 point2 points 1 year ago(1 child)I'm at work at the moment. Windows 10 Won't Boot Without Second Hard Drive The disc is in the...

So.. I have 2 drives 1 ssd and the other normal and gigabyte mobo (only the ssd bootable) . I had to unplug my SSD drive and use the longer cable for the HDD and a shorter one for the SSD but kept it in the same slot. weblink At this point it seems likely that this is a motherboard / BIOS issue.

Reboot, go to BIOS, make your SSD your main boot device in Boot Device Priority. permalinkembedsaveparentgive gold[–]Spawn3323[S] 0 points1 point2 points 1 year ago(0 children)All of the other devices are coming up as UEFI just the SSD (which has the OS on it). When I attempted to boot with SSD which has the OS installed it would say "attach a suitable boot device and press a key" or something like that. I have re-formatted the drive so it is completely empty but still it won't go past the dell screen.

At first, no luck. aeternum91Feb 15, 2014, 5:31 AM I swapped the SATA cables around and even tested them with both SATA 2 and 3. IF that was the case you should have replaced the PSU when YOU bought it.Then again you could have a defective HDD that is drawing excess current (doughtful).Added: Meoricin has a All rights reserved.REDDIT and the ALIEN Logo are registered trademarks of reddit inc.Advertise - technologyπRendered by PID 11950 on app-42 at 2017-01-11 12:30:02.057765+00:00 running 35e3b26 country code: DE.

I tried it for few weeks and than I decided to downgrade it to Windows 7. Then Win 10 went crazy. I guess that's why it's best to build a desktop from scratch and choose quality components. One day when I turned my computer on, it just wouldn't boot with my HDD attached but it boots with my SSD attached alone.

Proffitt Forum moderator / April 7, 2015 3:35 AM PDT In reply to: Thanks I appreciate your skills with bootable things like GPARTED. Why is the correct spelling "eating" and not "eatting"? In your case, since you say everything was running fine before, I don't think it's an issue with the power supply. Older BIOS leave it open for change.

Check to make sure that no cables are loose. It takes less than a minute and is completely free! I have re-formatted the drive so it is completely empty but still it won't go past the dell screen. only thing I can think of is a setting has been toggled to make it boot into the bios instead of the uefi?

Or what ever the MOBO chip is. Articles & News Forum Graphics & Displays CPU Components Motherboards Games Storage Overclocking Tutorials All categories Chart For IT Pros Get IT Center Brands Tutorials Other sites Tom's Guide Tom's