Home > Hard Drive > No Boot After Unplugging Setup Drive

No Boot After Unplugging Setup Drive

Contents

If I change it to boot the main hard drive first, and ignore the second hard drive, it does the same thing (not booting). You might find only one hard drive option in the boot priority list. This one had me scratching my head. When disconnecting or checking the hard drive connections, always make sure the computer is unplugged and has no power (hold down the power button for a few moments to drain any http://appsizematters.com/hard-drive/won-t-boot-if-2nd-hard-drive-installed.html

This may or may not require a new copy of Windows. The MBR is always located at the first sector so the BIOS can find it. Infact After OS Selection Screen (got Ubuntu as second OS as Windows 7 also on Disk 2) Windows tries to boot. I used my backup drive as a test to reinstall Ubuntu over the existing data in the drive. http://arstechnica.com/civis/viewtopic.php?f=20&t=1153515

Windows Won't Boot Without Second Hard Drive

Windows doesn't recommend doing this as the files are hidden for a reason. Thus I clearly stated that the dialog did in fact not show my installation of Windows 7 at that time. For it to boot off the SSD with no other drives attached, both system and boot should be on the SSD.System partitions and boot partitions are names for partitions (or volumes) While the SSD can certainly be your primary drive that you are booting from, first you must access the boot loader to begin the boot process.

  1. C: Dir <-check for Windows folder.
  2. This is really doing my head in.
  3. are you able to get onto windows now? & hmm not sure why its not booting into a uefi?
  4. I remember a few months ago when I was trying to troubleshoot it before I gave up I read that it should be in a later SATA port so I switched

So, short of reinstalling windows with only the main drive in, is there anything I can do to move it, or delete and restore it on the main drive ? Now you just need to enter your PC’s Setup program (sometimes called the BIOS) and change the boot order.I can’t tell you exactly how to do this, because it varies from I usually look for bad sectors "Reallocated Sector Count" represented by the raw value of attribute ID 5 (and C5 to a lesser extent). New Hard Drive Won't Boot Windows Hard drives into SATA 3-6.

I'm sorry for the trouble you're having! Windows Won't Boot With Second Hard Drive So, either I leave everything as it is (because like I said, I'm not even sure what happens if I format the second drive... Thank you and more power to you. All Rights Reserved Tom's Hardware Guide ™ Ad choices UbuntuCommunityAsk!DeveloperDesignDiscourseHardwareInsightsJujuShopMore ›AppsHelpForumLaunchpadMAASCanonical current community chat Ask Ubuntu Ask Ubuntu Meta your communities Sign up or log in to customize your list.

That was very likely an earlier release than what the OP is dealing with. Replaced Hard Drive Wont Boot Many laptops never came with an XP disc and often the user hasn't needed the disc for years and if they had one, they have no idea where it may be Did I screw something up ? Intel Core i5, nice video card, etc (I'll throw all the specs up later, I don't have them nearby).

Windows Won't Boot With Second Hard Drive

Allow that the first time, but say no the second time and continue to Startup Repair. http://www.tomshardware.com/forum/70251-63-windows-boot-removing-secondary-drive So I have put in my windows 8.1 dvd and it says something like "Drive locked, please unlock and try again". Windows Won't Boot Without Second Hard Drive Select Intel Select Analyse Here it will often tell you errors with the partitions (like invalid sector counts) or show bizarre partitions that may be overlapping or corrupted in the partition Windows 10 Won't Boot Without Second Hard Drive When I replaced it was the exact same motherboard.

Join Forum | Login | Today's Posts | Tutorials | Windows 10 Forum | Windows 8 Forum Welcome to Windows 7 Forums. this contact form You may see a warning like this… If you type y then it will quickly write a new MBR to the drive. BUT then, on EVERY boot-up, the process looks for those backups and cannot boot without them! I plugged the SSD back in before booting up. Computer Wont Turn On With Hard Drive Plugged In

Under EFI, boot order information is stored in NVRAM, and unfortunately, some EFIs will delete NVRAM entries that no longer exist. My SSD is the proper boot device!! Any help would be appreciated. have a peek here admin • December 30th, 2013 at 5:17 pm Hi Rick Thanks for the kind words.

The cause of this problem is that I bought an SSD for my boot drive, but I decided to use it in my laptop instead and to buy a larger one Installed A New Hard Drive Now Computer Won't Turn On permalinkembedsaveparentgive gold[–]Spawn3323[S] 0 points1 point2 points 1 year ago(0 children)Reinstalled windows and completed windows updates. If this value is greater than 0 you may want to click on the Perform Tests tab and run the "Short Self Test" to make sure that it runs with a

OnusJul 17, 2014, 12:15 PM Ok then, not the PSU (as to why check the way I suggested, it is because "startup" load is higher than "running" load, because various motors

It tells the computer where to find the OS to start booting. I don't know if win 10 will move the boot loader during a win7 upgrade or not. Desktop Computer Unplug the power cable and hold down the power button for a few moments to drain any stored power after unplugging. Windows 7 Won't Boot After Removing Secondary Drive Now I only have to resurrect my Ubuntu Ask a new question Read More Windows 7 Boot Related Resources After removing secondary hard drive unable to boot with primary Windows Won't

Everything was fine except when I started up I just got a black screen. The following dialog now shows my Windows 7 installation again.- applied DISKPART / BOOTSECT procedures as in Try 1- tried to boot from Result: Boot crashed during Windows Logo4. When i tried removing the xp HD i could not boot back into win7. Check This Out You must make and probably format the EFI partition yourself.

Unplug both cables to the new drive and boot. I look in the BIOS and the drive is there, it's the only one, but it doesn't show in the boot devices. I suspect it works from the install media because the drive you're transferring the bootloader to, "C", is not the current boot drive and no files on it are locked. Generally, soon after you turn on the PC, well before Windows loads, a message similar to “Press F2 for Setup” flashes onscreen.

More details on using TestDisk to repair partitions can be found here http://www.cgsecurity.org/wiki/TestDisk_Step_By_Step If you've gotten this far and still haven't found the reason why your computer does not boot, then Switch it to be 1st drive. Try - Setup: All 3 HD connected- normalt startup (w/o selecting boot device manually)Result: Failed, no boot manager found.7. These terms can be confusing because the system partition actually contains the files used to boot Windows 7, while the boot partition contains the system files.

Find More Posts by boyans 22 Jul 2012 #5 KayinAngel Windows 7 Pro x64 3 posts This is what I'm looking at in disk management. But basically, you have to create a 100 MB EFI partition, format it with FAT32, and install the boot files. Thats what I did. The first set of startup instructions is the Power On Self Test (POST).

Turns out unplugging my fans doesn't make my hard drive work. Error loading operating system. solved Accidental unplug with power on, stuck in boot loop with no BIOS. Dirty ol DogJul 29, 2014, 7:21 PM If the Asmedia driver is not there or corrupt it could halt the load of windows.

If it passes the diagnostics then move on to checking the MBR later in this post. Let's see the most common fix for this. Taylor_31Jul 30, 2014, 12:49 AM RussK1 said: Excellent! I have build a new computer.

But when I pressed reboot the updates started installing.