Home > Dual Boot > Problems Dual Booting XP And 7?

Problems Dual Booting XP And 7?

Contents

I plugged in the old XP drive into the Compaq, hoping to be able to boot from the old XP drive using the BIOS to select it, as covered in this So after deleteing all the partitions and installing from scratch it worked perfectly. More resources See also solved Windows 7 x64 / XP Pro x86 Dual Boot With 3TB Drives solved Windows 7 & 8 Dual boot on seprate hard drives, how do you Short answer for blue screening when trying to install Win XP on computers with SATA controller due no SATA drivers for that specific SATA controller on Win XP CD. weblink

May 29, 2010 Khaled Man You Are The Best One Who Explain this Method You are Professional May 30, 2010 Nash Ive tried this. After getting the bootloader back you should see both XP and Windows 7 as options in the Windows Boot Manager. I want a single OS on each drive, per my original message. One thing I didnt like about this process is that Win7 creates a small partition and when XP was installed, it saw both Win7 partitions and installed on drive E. (C:

Dual Boot Windows Xp And Windows 7

I had to reset manually then it would not boot to windows 7 after removing the xp op disk. In this example we’re freeing up 40GB of space. The technical details from the BSoD. --------------------------------------------------------------------------------------------------- A problem has been detected and windows has been shut down to prevent damage to your computer. by John.Wilkinson / April 27, 2010 1:12 AM PDT In reply to: Other way of dual booting XP and 7 (IDE and SATA Drives) 1.) You need not install XP on

  • Download a crack of windows 7 now!
  • I did what you suggested.
  • Such a configuration change may require you to reinstall the original software image when troubleshooting possible software and hardware issues with technical support.
  • Done and working.2.
  • John September 29, 2010 Chuck John, Thanks for the response.
  • TWO SATA Drives - want an OS on each, dual boot menu upon boot up.1.
  • Use Microsoft TweakUI to hide the 100MB partition from XP.
  • Did you try that?
  • Respectfully, please do NOT link the dual boot on "one" hard drive from the sevenforums.com Been there done that.

I followed your instructions to partiton, but when it came to show it the new volume showed as Healthy(Logical drive) not Healthy (Primary Partition). It is in error at the last step! What can I do now? Dual Boot Windows 7 And Xp Easybcd In EASYBCD,I have mistakenly select type of Operating system as VISTAbecause windows 7 option was not there.

To get both XP and Windows 7 as an option at the boot screen you can use the free utility EasyBCD 1.72 or their new 2.0 Beta. How To Dual Boot Windows Xp And Windows 7 (xp Installed First) Sharing (characters) is Caring! BatlanOct 1, 2013, 12:15 PM I have a similar situation but with some differences. https://www.cnet.com/forums/discussions/windows-xp-and-windows-7-dual-boot-issue-they-won-t-343514/ Anyhow, I hope the above links, if they work, are of help, I'll try and post any more info I find and how the New/Old build is going.

share|improve this answer answered Jun 26 '09 at 0:12 Evan Anderson 1,4601010 Hi I tried inserting my cd of windows 7 but then an error said ntldr is missing How To Install Windows Xp Over Windows 7 plz help June 23, 2011 chris Hi I have tried this and followed it to the letter, but when I try to install XP after unpacking it crahes to a blue Now enter the amount of space you want to shrink the volume. My problem is too boot the CD/DVD XP Installer not at all, so even I can make some steps of the XP instalation, but always appears to me a message when

How To Dual Boot Windows Xp And Windows 7 (xp Installed First)

All submitted content is subject to our Terms of Use. It goes through the start up animation and I get BSoD, so now I can't boot into XP or Win7 since the bootloader for XP was written over. Dual Boot Windows Xp And Windows 7 error acpi.sys any ideas May 7, 2010 Kalle Do I have to shrink the system drive or can I shrink another drive? Dual Boot Windows 7 And Xp Separate Hard Drives I saw this on PC Advisor and thought you should see it too.

For awhile it was trouble free computing with Win 7. have a peek at these guys It's something I have avoided doing on my machines. If so, skip on to the next section. Run CHKDSK /F to check for hard drive corruption, and then restart your computer. Windows Xp Dual Boot Windows 10

If you correctly configured easybcd then the following should show… First, you’ll need to right click on Computer and select Properties: Next, click Advanced System Settings Now click on the Settings How big do u recommd that I make the new partition? January 8, 2010 MariJewel Great! check over here Sorry, there was a problem flagging this post.

Join thousands of tech enthusiasts and participate. Dual Boot Windows 7 And Xp Same Partition I did not want to change the BIOS settings. Otherwise you'll have to go into bios each time you switch os.

If this is the first time you’ve seen this stop error screen, restart your computer.

Flag Permalink This was helpful (0) Collapse - About the mistake. But it sounds like XP was already on your system (and Ubuntu?) And you installed W7 after that?I did have Ubuntu installed before Windows 7 (same partition) but Ubuntu has a click ok to trminate the application. Dual Boot Windows 7 And Xp Usb Drive Oh, and as for the HP issue, you can always keep a clean Win7 HD that you can switch out if you need to call the help desks.

Pls this is urgent. I am trying to load XP first on the hard drive so that this won't happen, but since I don't have a Win7 OS disk, just the restore disks, I am You'll have the old Windows Vista/7 entry and the new Windows XP entry you created in the steps above. this content Thanks for any help…..

It does not apply. I only gave that article a cursorary glance, but I'll have to read over it more closely. (On my main laptop, I just put Windows 7 in to a VHD on Just my guess may have misread your post, maybe?Also after my OS was loaded then I went in a renamed the partition so I could tell which is which. remember the place to get more awesome tutorials, pc programs, games, and much more is at isoplanet.com rate comment for help ...Show All Items Step 1: Create a New PartitionShow

Know what it is? Would this be the point that I could install those drivers, assuming that they are the ones that would work? The second partition is used for the operating system and user files, and is assigned the default drive letter C. Continue to step 8 below and run EasyBCD from Windows 7 instead. 7.

Most bios's default to IDE mode which is why you never ran into this situation. June 1, 2010 GT Had the same problem as Larry but I don't even get the "welcome to setup" screen . VistaBootPRO 3.3 (free version) will still work too which you can download here. But Windows 7 startup screen changed to VISTA Startup screen and my registered windows 7 becomes non genuine Windows 7.Can there be any way to recover Startup Screen for Windwos 7kindly

When you power on you hit F12 (Gigabyte MB) during post. I can now only boot to Windows 7 now. I need to be able to share and receive a signal from the printer's of PC MASTER, that is, the microcomputer where the printer is installed.