Home > Dual Boot > Changing "System" Disk On An XP/7 Multiboot Setup

Changing "System" Disk On An XP/7 Multiboot Setup


The Windows 7 boot manager will take over the system completely. [#PAGE-BREAK#Step 4 - Managing the Bootloader#] Once Windows 7 is installed and the system reboots you'll be presented with a Thanks August 8, 2010 Pablo Picaso Like many others I am getting a BSoD. Its better not to Dual boot. Now the problem is when I start my computer, it does not ask which OS I want to use. navigate here

Disconnect the Win7 drive from the PC, install XP on the other drive, and reconnect the Win7 drive. I could boot to XP or Win7So, the pc was upon my work table, I brought it down to its place on the floor under my desk very gently. Grab yourself a copy of iReboot from the "Useful Utilities" page – it's free and you'll love it. Good post.

How To Set Default Os In Dual Boot

January 17, 2010 John P OK, have done it all, but not quite as simple and straight forward as that posted (although a good attempt). The New Simple Volume Wizard launches which is a straight forward process. And when I boot, it's just hotkey (F11 for MSI mobos) startup making me choose between the IDE (XP) or SATA (7).It isn't as neat as the bootloader but it will

I had to reset manually then it would not boot to windows 7 after removing the xp op disk. How-To Geek Articles l l How to Replace Windows Essentials 2012 After Support Ends in January How to Change How Long Updates Are Deferred in Windows 10 What's New in Windows solved Dual boot with two 2 separate hard drives, one has windows 7 and one has windows 8.1 Questions on Dual Booting Windows 7 on two hard drives and their interaction How To Change Default Os In Dual Boot Windows 10 Then choose all the available space it gives you.

The main difference between the two entries is the drive which they are loaded from. How To Install Windows 7 And Xp On The Same Computer If you're installing Windows XP to a SATA drive, make sure you hit F6 to load the SATA drives. but by question is if i can just install XP over windows 7 without having the original windows 7 disk. http://www.sevenforums.com/installation-setup/57385-changing-system-disk-xp-7-multiboot-setup.html This brings up a list of drives to boot from, ie HDD1, HDD2, SSD, DVD what ever, you select and computer boots to that drive - This DOES NOT change boot

I don't know how it works fine now, because always when I tried to dualboot nothing going well 'till today. Change Dual Boot Order Windows 10 Can anyone solve my problem???????? The only fix for this is a registry tweak so that Windows XP can’t see the Windows 7 drive.Have you considered using the virtual Windows XP on Windows 7 it is It also works fine for modifying the Windows 7 bootloader.

  1. If so, any trouble copy software/files/data from the Windows XP drive to the Windows 7 drive?
  2. Virtual Windows XP can be installed on either Windows 7 ultimate or professional versions.
  3. You'll then click the Next button and continue with the installation procedure as you normally would.
  4. Luka - dont believe what shops tell you, most of them know very little.
  5. August 15, 2010 karthik i have installed xp after installing vista… now i am not able to get bto vista… when i switch on it directs me to xp only… how

How To Install Windows 7 And Xp On The Same Computer

VistaBootPRO 3.3 (free version) will still work too which you can download here. The install will then commence. How To Set Default Os In Dual Boot Have you found a solution ? How To Dual Boot Windows Xp And Windows 7 (xp Installed First) Any feedback is appreciated! -Greg.

Creating a partition for Windows 7 Once you download and install Easeus Partition Master Home Edition, repartitioning your Windows XP hard disk is easy. check over here July 23, 2007 steve I bought a new pc that unfortunately came with Vista Home premium.I would like to run my XPpro on it instead..can that be done? September 29, 2010 Chuck Here's what HP says; I probably should have checked this first. "Reasons not to try a dual-boot system While documentation on how to use dual-booting may be After the process completes you’ll see the new Unallocated space. Windows Xp Dual Boot Windows 10

It starts with Windows XP everytime. You have no idea how this helped me, it fixed my problem with blank operating system as primary one, thanks a lot :) April 18, 2009 Colin Brilliant, I was faffing Please understand this is TWO individual hard drives, I want an Operating System installed on each individually. (win7 on ONE, XP on the other)4. his comment is here I am sitting here looking at it.

I am cautious in using third party software. Dual Boot Windows 7 And Xp Separate Hard Drives March 20, 2010 Réplika I still use xp, on my pc, microsoft doesn't support sp1 anymore so I think to use windows 7 now, but ı will have to change my This brings up a list of drives to boot from, ie HDD1, HDD2, SSD, DVD what ever, you select and computer boots to that drive - This DOES NOT change boot

I don't know the best way to word this but from what I understand, you guys are saying I can switch from my computer loading Windows 7 by default, to loading

January 21, 2011 matty does it need windows xp cd or…what? January 17, 2011 isha can anyone help me this time March 20, 2011 Paul I am trying to set up a dual Vista and XP System. Can I run both systems by setting the Bios to boot from usb first, then dualbooting either system, if so could you give me step by step instructions or point me How To Change Default Operating System In Windows 10 I tried directly installed a Windows XP on my Notebook.

This is due to XP writing it’s bootloader over Windows 7’s. I tried moving the boot flag to vista using diskpart, computer management and the gparted live cd. I followed through the steps quite okay, however just before creating a new partition as illustrated I got a message " The operation you selected will convert the selected physical disk(s) weblink Short answer for blue screening when trying to install Win XP on computers with SATA controller due no SATA drivers for that specific SATA controller on Win XP CD.

One issue I had installing XP is that it couldnt find a HD and would BSoD during the XP CD installer. Tried to install XP on to it, got message-Setup could not continue newer version of Windows already installed. Now the problem is when I start my computer, it does not ask which OS I want to use. How to change it?

Reboot the machine and the boot menu will reflect the changes you've made. I would think there would be a microsoft way of doing this. It will work. Keep it in an enclosure and it can double as a clone backup.

Can you help in the way where the use of your BCD software is not in use.